AWRM
Previous Thread
Next Thread
Print Thread
BDU Tips #98528
07/29/2006 05:59 AM
07/29/2006 05:59 AM
Joined: Jul 2006
Posts: 109
Mohave County
C
Chainsaw Offline OP
Member
Chainsaw  Offline OP
Member
C
Joined: Jul 2006
Posts: 109
Mohave County
BDU Tips

MAKE YOUR BDUs LIGHTER AND COOLER



The current Battle Dress Uniform (BDU) has too much material making it hot and a source of Soldier heat injuries. It also absorbs moisture and sweat making it work against the extended cold weather clothing system (ECWCS) that seeks to keep the Soldier dry at all times. This is a source of Soldier frostbite/cold weather injuries. About the only thing the BDU does is provide covering for the Soldier in camouflage and abrasion resistance from vegetation. Realizing this, the best that we can do is minimize the heat and cold weather flaws it has.

1. Never starch your BDUs-- once starched the starch never leaves, creating a uniform that breaths even less, holding heat in and odors. Starching weakens the fabric and ruins the infrared protective coating...unless you a marine with a death wish or working for the enemy, only clean and press the BDU.

2. Code letter the top and bottoms of BDUs so they fade together-- with a permanent black marker, make a letter A, B, C, D etc on the inside bottom of the BDU top and the rear pocket of its matching bottom. This way you will keep them together during wash and wear them at the same time to insure they fade/wear evenly. The coding will also tell you how many BDUs set you have.

3. Remove excess material from your BDUs-- remove all laundry tags and size labels. These serve no purpose since you know only to machine wash and dry your BDUs. The laundry tag under the collar is irritating to the neck. If you have different sizes, use the permanent marker to mark the size on the lower right hand corner where you marked the code letter. "SR"=small regular, "MR"=medium regular......etc. On the BDU top, replace all pocket buttons with Velcro, this will improve your low-crawling and when the uniform is pressed eliminate the button bulge from showing (optional).

Remove the buttons that close the BDU top and the extra flap of material that holds the button hole and sew the top together so it is a pullover. This dramatically eliminates the amount of material at the torso that can trap heat and moisture. It also makes the BDU top stronger. Cut under the armpits two ventilation slits to help let heat escape from under the armpits. The IDF uniforms have this feature. On the BDU bottom, remove the front bug flap from your fly. Cut off the side tightening tabs at your waist, that's why you have belt loops to wear your rigger's belt. These straps don't work and are extra weight. The bottom of the trousers have leg ties, since you tuck your cuffs into your boots, pull on these cords and cut off as much as you can.

4. Sew a small piece of black elastic to form a foot stirrup on the bottom of your trouser cuffs-- this will allow you to put your pants on quickly and place your foot into your speed-laced boots with your trouser legs ready to be wrapped by your boots. A small piece of elastic has been proven to be unnoticeable by your sock covered foot. This feature unlike blousing bands and straps does not restrict circulation.

5. Sew a last name tape above the right rear pocket of your BDU trousers to prevent theft.-- Your name tape on your trousers also speeds recovery of your uniforms in a group laundry situation.

6. Do not wear underwear when wearing BDU trousers-- wearing underwear or even biker shorts traps heat and moisture at the waist and groin area, creating conditions for fungal growth unless you are the designated unit far side river bank swimmer, you need not to wear swimtrunks under your BDUs, in fact you could strip to just BDU trousers and swim across to reduce the amount of your uniform that gets wet. Your legs seeing as they are constantly moving in the infantry (HA! HA!) they will quickly dry out from muscular heat. It is lower circulation areas (feet, hands, chest) that need to stay warm.

7. Remove the pocket holder piece of material in the top pocket of the BDU top since its not needed and extra material.

8. Wear summer weight BDUs all the time-- the only time you should where the winter weight BDUs is when it is really cold. Since the insulating layers and jackets that you wear that keeps you warm in cold weather, there is no reason why the U.S. Army couldn't standardized on just one type of BDU that is light as possible.

9. Obtain a set of Nomex, fire resistant BDUs for combat and Airborne/vehicle operations use.-- some of the 23 paratroopers that died at the 1993 Pope AFB crash would have lived had they been wearing Nomex? Aircrew BDUs. These uniforms have national stock numbers (NSN) and can be ordered through the supply system. NSNs are: 8415-01-328-8253 for the jacket, 8415-01-328-8269 for the trousers. There is no reason why Nomex? BDUs couldn't be put on sale at the Army Air Force Exchange System (AAFES) clothing sales stores. So the individual Soldier could buy his own set.

For fire protection, Nomex? BDUs need to be issued to all Soldiers to counter the fire risk from wearing synthetic insulating materials like Gore-tex? and polypropylene, especially those parachuting from aircraft, clearing mines, standing upright from AFV hatches and those on dismounted patrols near urban areas. Their NSNs are: 8415-01-328-8253 for the jacket, 8415-01-328-8269 for the trousers. For jump padding, cut an unused piece of the issue sleeping mat, and slip into the backside of your Nomex? BDUs knees and elbows.

Make clothing flame retardant.

Mix together nine ounces 20 Mule Team Borax and four ounces boric acid in one gallon water. If the article is washable, soak in the solution after final rinsing, then dry. If the garment is not washable, spray with the solution. This solution, recommended by fire departments, may wash out of clothing and should be used after each washing or dry cleaning.

These steps if taken above can remove about a pound of weight from your BDUs and minimize the negative aspects they have. The new nylon-cotton hot weather BDU, while more durable is not as cool as the 100% cotton rip-stop BDU. Obtain as many sets of the 100% cotton BDUs while you can. I'd like to say remove the two lower top pockets which are usually covered by LBE/TLBV to enable a tuck-in wear feature for rappelling/parachuting, but we have to look like everyone else. It is my hope that some day a simplified BDU without all these extra materials be issued to Soldiers and without the two lower jacket pockets. There is work underway to create reversible camouflage BDU with day desert on one side and woodland camouflage on the other for rapid-response to world crisises without having to spend precious time issuing different color uniforms. Such chameleonic capability would also help troops as they maneuver across the battlefield and enounter different colors so as to better remain undetected by the enemy.

The U.S. Army has the best way to wear the BDUs. Rolling the sleeves up into a quick-release cuff is tedious, but worth it when you need to go sleeves down compared to the marine bone-head roll-up which you have to fight to undo. Blousing the boots with bands, springs is another jarhead ego trip which is not functional that is avoided. What matters in WAR is victory, not image or grabbing media camera attention. BDUs can be air-delivered along with all the fighting vehicles and equipment needed by Soldiers/Paratroopers--in their case without parachutes using freedrop techniques utilized during Operation Provide Promise, the food/clothing/medical supply missions that saved the Bosnian people from certain death until ground peacekeepers put an end to the killing.

when washing and drying your bdus you should turn them inside out to prevent fading, also washing them by hand is a very good way to prevent them from fading (using a very small amount of soup, warm water, and a scrub brush)

also the bdus constructed of 50/50 nyco (nylon cotton blend fabric) barely fades after 70 washes, its noticable but not by much, especially when cpompared to bdus made of a cotton and poly blend or the worst just cotton. by buying the 50/50 sets you will also save money in the long run, you dont want to be in the bush while in the "white" i personally like the 50/50 bdus better for a few reasons, 1. the material i can wash them in a machine w/o worrying about fading, and 2. the overall strength and durability of the fabric. if you do go w/ the 100% cottons or the cotton/poly bdus my advice would be to wash them by hand to preserve the color longer.


buying BDU's are best from gold nugget out of Radcliff KY. these are genuine military issue. in the military if a soldier gains of loses weight within 6 months he of she is issued new and has to turn in old. well gold nugget found this out and their's are secound to none. cheaper that dirt and the rest have misleading descriptions; it says military "like".


www.goldnuggetsurplus.com

"If you hear of my Death.You will know ,they came for my guns."- Molon Labe


In guerrilla warfare they taught us to use our weaknesses as strengths.
If they're big and you're little, then you're fast and they're slow. You're hidden and they're exposed. You fight only the battles you know you can win.
Re: BDU Tips #98529
08/22/2006 12:17 AM
08/22/2006 12:17 AM
Joined: Jul 2006
Posts: 104
U.S.A.
M
Mike11Bravo The Lurker Offline
Member
Mike11Bravo The Lurker  Offline
Member
M
Joined: Jul 2006
Posts: 104
U.S.A.
Check and see where they are made. If they are made in asia then the dye will be vegetable dye and it gives new meaning to the word faded.


What is going to happen will and there is nothing that can be done about it excepted be prepared for it. Be a person of action.

Mike11Bravo The Lurker

Moderated by  airforce, ConSigCor 

.
©>
©All information posted on this site is the private property of the individual author and AWRM.net and may not be reproduced without permission. © 2001-2020 AWRM.net All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.6.1.1